EasyManuals Logo

AT&T CL82201 User Manual

AT&T CL82201
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
Appendix
66
Troubleshooting
My cordless handset isn’t performing normally.
Make sure you plug the power cord securely into the telephone base. Plug the
power adapter into a different, working electrical outlet without a wall switch.
Move the cordless handset closer to the telephone base. You might have
moved out of range.
Reset the telephone base. Unplug the electrical power. Wait for 15
seconds then plug it back in. Allow up to one minute for the cordless
handset and telephone base to reset.
Other electronic products such as HAM radios and other DECT phones can
cause interference with your cordless phone. Try installing your phone as
far away as possible from these types of electronic devices.
Out of range OR No pwr at base appears on my cordless handset.
Ensure you plug the telephone base in properly and the power is on.
Place the cordless handset in the telephone base for one minute to allow
the cordless handset and base to synchronize.
Move the cordless handset closer to the telephone base. You might have
moved out of range.
Reset the telephone base. Unplug the electrical power. Wait for 15
seconds then plug it back in. Allow up to one minute for the cordless
handset and telephone base to reset.
Other electronic products such as HAM radios and other DECT phones can
cause interference with your cordless phone. Try installing your phone as
far away as possible from these types of electronic devices.
The batteries do not hold a charge.
If the cordless handset is in the telephone base or charger and the charge
light is not on, refer to The charge light is off (page 69).
Charge the battery in the cordless handset for at least 10 hours. For
optimum daily performance, return the cordless handset to the telephone
base or charger when not in use.
If the battery is depleted, it might take approximately 30 minutes to
charge the handset before it shows Low battery. Refer to the table on
page 6 for details.
You might need to purchase a new battery. Please refer to Battery
installation and charging in this user’s manual on pages 6-7.

Table of Contents

Other manuals for AT&T CL82201

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AT&T CL82201 and is the answer not in the manual?

AT&T CL82201 Specifications

General IconGeneral
Colorgray
Speakerphoneyes
Expandableyes
Paging Locatoryes
Volume Controlyes
Intercomyes
Incoming Lines1
Record Time14 minutes
Message Counteryes
New Message Indicatoryes
Caller IDyes
Call Waitingyes
Answering Systemyes
Flash Functionyes
Redial Functionyes
Conference Callyes
Speed Dial Memoryyes
Caller ID Memory50 gigabytes
Maximum Incoming Message Length14 minutes
Handsetsyes
Expansion Base Stations1
Expansion Handsets2, 12
Backlit Keypadyes
Keypad Locationhandset
Bluetoothno
Remote Accessyes
Frequencydect 6.0 digital
Weight and Dimensions IconWeight and Dimensions
Depth4.13 inches
Height5.9 inches
Width8.74 inches
Net Weight2.29 ounces

Related product manuals