EasyManuals Logo

AT&T CL82201 User Manual

AT&T CL82201
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
Appendix
65
Troubleshooting
If you have difficulty with your phone, please try the suggestions below. For
Customer Service, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
My telephone doesn’t work at all.
Make sure the power cord is securely plugged in.
Make sure you plug the battery connector securely into the cordless handset.
Make sure you plug the telephone line cord securely and firmly into the
telephone base and the telephone wall jack.
Charge the battery in the cordless handset for at least 10 hours. For
optimum daily performance, return the cordless handset to the telephone
base or charger when not in use.
If the battery is depleted, it might take approximately 30 minutes to
charge the handset before it shows Low battery. See page 6 for details.
Reset the telephone base. Unplug the electrical power. Wait for
approximately 15 seconds, then plug it back in. Allow up to one minute for
the cordless handset and telephone base to reset.
You may need to purchase a new battery. Please refer to
Battery installation and charging in this user’s manual on pages 6-7.
I cannot get a dial tone.
Try all the suggestions above.
Move the cordless handset closer to the telephone base. You might have
moved out of range.
If the previous suggestions do not work, disconnect the telephone base
from the telephone jack and connect to a different phone. If there is no
dial tone on that phone either, the problem is in your wiring or telephone
service. Contact your telephone service provider.
Your line cord might be defective. Try installing a new line cord.
I cannot dial out.
Try all the suggestions above.
Make sure you have a dial tone before dialing. The cordless handset might
take a second or two to find the telephone base and produce a dial tone.
This is normal. Wait an extra second before dialing.
Eliminate any background noise. Noise from a television, radio or other
appliances might cause the phone to not dial out properly. If you cannot
eliminate the background noise, first try muting the cordless handset
before dialing, or dialing from another room with less background noise.
If other phones in your home are having the same problem, contact your
telephone service provider (charges might apply).

Table of Contents

Other manuals for AT&T CL82201

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AT&T CL82201 and is the answer not in the manual?

AT&T CL82201 Specifications

General IconGeneral
Colorgray
Speakerphoneyes
Expandableyes
Paging Locatoryes
Volume Controlyes
Intercomyes
Incoming Lines1
Record Time14 minutes
Message Counteryes
New Message Indicatoryes
Caller IDyes
Call Waitingyes
Answering Systemyes
Flash Functionyes
Redial Functionyes
Conference Callyes
Speed Dial Memoryyes
Caller ID Memory50 gigabytes
Maximum Incoming Message Length14 minutes
Handsetsyes
Expansion Base Stations1
Expansion Handsets2, 12
Backlit Keypadyes
Keypad Locationhandset
Bluetoothno
Remote Accessyes
Frequencydect 6.0 digital
Weight and Dimensions IconWeight and Dimensions
Depth4.13 inches
Height5.9 inches
Width8.74 inches
Net Weight2.29 ounces

Related product manuals