17
Operate
Operation Steps
Redial Press REDIAL repeatedly to select the desired entry ->
PHONE or /SPEAKER to call.
Volume control
Press / VOLUME to decrease or press / VOLUME to
increase the listening volume during a call.
Call waiting
(Requires
subscription
from telephone
service provider)
Press FLASH to put current call on hold and to take the new
call; press again to switch back and forth between calls.
Directory
The directory can store up to 50 entries, which are shared by all system devices.
Operation Steps
Add an entry
1. -> or -> Directory -> SELECT.
2. or -> Add contact -> SELECT.
3. Enter a telephone number up to 30 digits -> SELECT.
4. Enter a name up to 15 characters -> SELECT.
Search/dial an
entry
1. in idle mode.
2. Press or to browse through the directory, or press
the dialing keys (0-9) to start a name search.
3. Press
or /SPEAKER on a handset to call.
Save a caller ID
log entry to the
directory
1. when the handset is not in use -> or to
browse.
2. When the desired entry displays -> SELECT.
3. SELECT again to choose Directory.
4. Edit the telephone number, if needed -> SELECT.
5. Edit the name, if needed -> SELECT.
To Next Page
Loading...
