15
Telephone settings
Handset settings
NOTES:
To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
When there are up to 5 handsets registered, the telephone system supports caller ID announce
for all handsets. If 6 or more handsets are registered, the system supports caller ID announce for
the first 4 registered handsets only.
This feature does not announce information for call waiting calls.
It takes at least 2 rings for the phone to receive caller ID information and announce it. If the
phone is answered before the end of the second ring, the phone won’t have time to announce
the caller’s information.
Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
Caller ID announce is available in English only.
Set speed dial voicemail number
This feature lets you save your voicemail number for easy access when you
press and hold the 1 key.
To set your voicemail number:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to >Voicemail #, then press
MENU/SELECT.
4. Use the dialing keys to enter the voicemail access number
provided by your telephone service provider (up to 30
digits) when prompted.
Press qCID or pDIR to move the cursor to the left or right.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press REDIAL/PAUSE to enter a three-second dialing pause
(a p appears).
5. Press MENU/SELECT to save. Voicemail # saved shows on
the handset.
•
•
•
•
•
•
•
•
•
•
VOICEMAIL #
_
p
q
Caller ID annc
>Voicemail #
p
q
Set date/time
>Settings
p
q
To Next Page
Loading...
Need help?
General
Weight and Dimensions
