Multiple handset use
Intercom
Using the telephone base:
1. Press MENU/SELECT in idle mode to enter the main
menu. Press qCID or pDIR to scroll to Intercom, then
press MENU/SELECT.
If you have one handset, the telephone base shows
Calling HANDSET X.
If you have more than one handset, the telephone
base shows INTERCOM TO: Use the dialing keys to
enter a specific handset number (1-9 for handsets
1-9, TONE followed by 0-2 for handsets 10-12, or
TONE followed by # for all handsets), or press
qCID or pDIR to scroll to the desired handset and
press MENU/SELECT. The telephone base shows
Calling HANDSET X or Calling all handsets.
The destination handset(s) rings and shows Base is calling,
BASE 0 is calling or BASE 0 is calling all.
2. To answer the intercom call, press PHONE/FLASH, /SPEA�ERSPEA�ER or any
dialing key (0-9, TONE , or
#
) on the destination handset. Both the base
and the handset now show Intercom.
3. To end the intercom call, one party presses OFF/CANCEL, or places the
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display The other party hears four beeps. Both devices display
Intercom ended.
NOTES:
Before the intercom call is answered, you can cancel it by pressing OFF/CANCELCANCEL on the
handset or CANCEL on the telephone base..
If the called party does not answer within 100 seconds or if the handset is in use, on a call or out
of range, the initiating device shows No answer. Try again.
To temporarily silence the intercom ringer, press OFF/CANCEL or MUTE/DELETE on the
handset, or press CANCEL or MUTE on the telephone base.
You can only use one pair of devices at a time to make intercom calls.
•
•
•
•
•
•
Calling
HANDSET X
Intercom
Base
is calling
47
To Next Page
Loading...
Need help?
General
