Answering system
About the answering system
Answering system and voicemail indicators
Your telephone has separate indicators for two different types of voice
messages: those left on its built-in digital answering system and those
left at your telephone service provider’s voicemail (fees may apply). Your
telephone’s built-in digital answering system messages and voicemail
messages are separate. Each alerts you to new messages differently.
If and XX New messages show on the handset and
the telephone base, there are new messages in the built-in
answering system. To listen to messages recorded on your
digital answering system, press /PLAY/STOP on the
telephone base (page 88).
If and New voicemail display on the handset
and the telephone base, your telephone service
provider is indicating that it has new voicemail
for you. To listen to your voicemail, you typically
dial an access number provided by your telephone
service provider, followed by a security code or PIN.
Some telephone service providers bundle or combine
multiple services like voicemail and call waiting,
so you may not be aware that you have voicemail.
To check what services you have and how to access them, contact your
telephone service provider.
To use your voicemail service rather than your answering system, turn off
your answering system. To use your answering system rather than your
voicemail service, contact your telephone service provider to deactivate
your voicemail service.
NOTE: After reviewing all new messages, the number of old messages appears on the
message counter.
•
•
84
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON
To Next Page
Loading...
Need help?
General
