Answering system
Answering system settings
Message recording time
You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
To change the setting:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode, press
MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then
press MENU/SELECT.
3. Press qCID or pDIR to scroll to Ans sys setup, then
press MENU/SELECT.
4. Press qCID or pDIR to scroll to Recording time, then
press MENU/SELECT.
5. Press qCID or pDIR to choose 3 minutes, 2 minutes or
1 minute, then press MENU/SELECT to save the setting.
You hear a confirmation tone.
RECORDING TIME
>3 minutes
p
q
>Recording time
Msg alert tone
p
q
83
RECORDING TIME
>3 minutes
p
q
>Recording time
Msg alert tone
p
q
To Next Page
Loading...
