Directory
Speed dial
The telephone system has nine speed dial locations (2-9, 0)
and a voicemail access location 1 where you can store
the telephone numbers you wish to dial more quickly.
You can store up to 30 digits in each location. Speed
dial assignments can only be selected from the existing
directory entries. The voicemail access number must be
manually entered. In the directory, speed dial locations
are indicated by their number on the bottom right hand
corner of the entry.
Assign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Directory. Press MENU/SELECT.
3. Press qCID or pDIR to scroll to Speed dial. Press MENU/SELECT.
4. Press qCID or pDIR to choose your desired speed dial
location (0 or 2-9), then press MENU/SELECT. The screen
briefly shows Copy from Directory..., then displays the
directory list.
5. Press qCID or pDIR to scroll to the phone number you
wish to assign to the selected speed dial location.
6. Press MENU/SELECT to save the setting and return to
the previous menu. There is a confirmation tone and the
screen returns to the speed dial list.
-OR-
1. When the telephone is idle, press and hold any dialing keys
(0 or 2-9).
2. Press qCID or pDIR to choose your desired speed dial location (0 or 2-9),
then press MENU/SELECT. The screen briefly shows Copy from Directory...,
then displays the directory list.
3. Press qCID or pDIR to scroll to the phone number you wish to assign to
the selected speed dial location.
4. Press MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone and the screen returns to the speed dial list.
Add contact
>Speed dial
>2:Robert Brown
3:<Unassigned>
Answering sys
>Directory
Speed dial location
Robert Brown
888-883-2445
2
Robert Brown
888-883-2445
p
q
2
Speed dial location
65
To Next Page
Loading...
