Call block
Call block
Review the call block list
1. When the telephone base is in idle mode, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT again to choose Block list.
4. Press MENU/SELECT again to choose Review.
5. Press qCID or pDIR to browse through the call block
entries.
NOTE: Block list is empty appears if there are no call block entries.
Save a caller ID log entry to call block list
1. Search for the desired caller ID log entry (see Review the caller ID log on
page 69).
2. When the desired entry displays, press MENU/SELECT.
3. Press qCID or pDIR to scroll to Call block, then press MENU/SELECT.
4. When the screen displays EDIT NUMBER, use the dialing keys to edit
the number.
Press qCID or pDIR to move the cursor to the left or right.
Press X/DELETE on the telephone base to backspace and erase a digit.
Press and hold X/DELETE on the telephone base to erase the
entire entry.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a p appears).
5. Press MENU/SELECT to move on to the name.
6. When the screen displays EDIT NAME, use the dialing keys to edit the name.
Press qCID or pDIR to move the cursor to the left or right.
Press 0 to add a space.
Press X/DELETE on the telephone base to erase a character.
Press and hold X/DELETE on the telephone base to erase all characters.
Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press #
(pound key).
7. Press MENU/SELECT when done. The screen shows Saved.
•
•
•
•
•
•
•
•
•
77
>Review
Add new entry
p
q
To Next Page
Loading...
Need help?
General
