AT&T CL83464 User Manual

Answering system
Answering system settings
To delete or reset your outgoing announcement:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press MENU/SELECT again to select Announcement.
4. Press qCID or pDIR to scroll to Play annc, then press MENU/SELECT.
5. While the announcement is playing, press MUTE/DELETE to delete the
announcement. The screen shows Annc. Deleted.
-OR-
1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press MENU/SELECT again to select Announcement.
4. Press qCID or pDIR to scroll to Reset annc, then press MENU/SELECT. The
screen shows Reset to default annc?
5. Press MENU/SELECT again to confirm. The screen shows
Annc. reset to default.
Using the telephone base:
1. When the telephone base is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press MENU/SELECT again to select Announcement.
4. Press qCID or pDIR to scroll to Play annc, then press MENU/SELECT.
5. While the announcement is playing, press X/DELETE to delete the
announcement. The screen shows Annc. Deleted.
When your announcement is deleted, the system answers calls with the
default announcement described on page 80. You cannot delete the default
announcement.
82

AT&T CL83464 Specifications

General

Brand	AT&T
Model	CL83464
Category	Cordless Telephone
Language	English