Answering system
106
Answering system settings
To delete or reset your outgoing announcement:
Using a cordless handset or the telephone base:
1. When the telephone is in idle mode, press MENU/
SELECT.
2. Press
CID or DIR to scroll to Answering sys, then press MENU/SELECT.
3. Press
MENU/SELECT again to select Announcement.
4. Press
CID or DIR to scroll to Play annc, then press MENU/SELECT.
5. While the announcement is playing, press
MUTE/DELETE to delete the
announcement. The system announces, “Announcement deleted” and the
screen shows Annc. Deleted.
-OR-
1. When the telephone is in idle mode, press MENU/
SELECT.
2. Press
CID or DIR to scroll to Answering sys, then press MENU/SELECT.
3. Press
MENU/SELECT again to select Announcement.
4. Press
CID or DIR to scroll to Reset annc, then press MENU/SELECT. The
screen shows Reset to default annc?.
5. Press
MENU/SELECT again to conrm. The screen shows Annc. reset to
default before returning to the previous menu.
When your announcement is deleted, the system answers calls with the
default announcement described on page 104. You cannot delete the
default announcement.
To Next Page
Loading...
Need help?
General
