80
Smart call blocker
Call block settings
Set Smart call blocker on/o
The Smart call blocker feature is set to on by default.
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use, and
then press
MENU/SELECT to select SCB On/Off.
-OR-
Press MENU/
SELECT to enter the main menu when the
telephone is not in use. Press CID or DIR to scroll to
Smart call blk, then press MENU/SELECT twice.
2. Press
CID or DIR to highlight On or Off, then press
MENU/SELECT to save the setting. You hear a confirmation
tone.
Control calls without numbers
Use this setting to control “out of area” or “Private” calls. You can choose to
allow or reject these calls directly. You can also choose to screen them with
or without learning the callers’ names before you decide whether to answer
or reject these calls. Moreover, you can forward these calls to the answering
system.
To change the setting:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when the telephone is not in use.
-OR-
Press MENU/
SELECT to enter the main menu when the
telephone is not in use. Press CID or DIR to scroll to
Smart call blk, then press MENU/SELECT.
2. Press
CID or DIR to scroll to Calls w/o num, then press
MENU/SELECT.
3. Press
CID or DIR to choose one of the following options,
then press MENU/SELECT.
Screening - ask the caller to press the pound key (#)
or to say his/her name before the call rings on your
telephone.
Allow - allow the calls to get through and ring.
Answering sys - forward the calls to the answering system without
ringing.
Block - reject the calls with block announcement.
Answering sys
>Smart call blk
Answering sys
>Smart call blk
>SCB On/Off
Block list
CALLS W/O NUM
>Screening
Star name list
>Calls w/o num
To Next Page
Loading...
Need help?
General
