33
Telephone settings
Telephone base settings
Caller ID announce
The caller ID announce feature lets you know who’s calling without having to
look at the display. When you have an incoming call, the handset and/or base
speaks “Call from...” and the name of the caller based on the directory or caller
ID information. If the caller’s name is private or unknown, the phone number
up to the last 11 digits will be announced. If the caller’s phone number is also
private or unknown, no information will be announced. The default setting is
On.
To turn on or o the caller ID announce feature:
1. Press MENU/
SELECT in idle mode to enter the
main menu.
2. Press
CID or DIR to scroll to Settings, then press
MENU/SELECT.
3. Press
CID or DIR to scroll to Caller ID annc, then
press MENU/SELECT.
4. Press
CID or DIR to scroll to the desired option, then
press MENU/SELECT.
Set all On/O - Change the setting for the base and all handsets.
Base - Change the setting for the telephone base only.
5. Press
CID or DIR to highlight On or Off, then press MENU/SELECT. There
is a confirmation tone and the screen returns to the previous menu. If you
change the setting for Set all On/O, the screen shows CID Annc ON/OFF
on all HS & BS.
Notes:
To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider.
If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base, the caller ID announce
setting for all devices also applies to the cordless speakerphone. When the setting is On, the cordless
speakerphone speaks “Call from...” and the name of the caller based on the directory or caller ID information
during an incoming call. If the caller’s name is unavailable, the phone number up to the last 11 digits will be
announced.
This feature does not announce information for call waiting calls.
It takes at least 2 rings for the phone to receive caller ID information and announce it. If the phone is answered
before the end of the second ring, the phone won’t have time to announce the caller’s information.
Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
Caller ID announce is available in English only.
LCD language
>Caller ID annc
CALLER ID ANNC
>Set all On/Off
To Next Page
Loading...
Need help?
General
