Telephone settings
32
Telephone base settings settings
Key tone
The telephone base is set to beep with each key press. You can adjust the
key tone volume or turn it off. If you turn off the key tone, there are no
beeps when you press keys.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to Key tone, then press
MENU/SELECT.
4. Press qCID or pDIR to select the desired volume
or Off.
5. Press MENU/SELECT to save your preference. There
is a confirmation tone and the screen returns to the
previous menu.
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps below to turn the
CID time sync feature on or off. The default setting is On.
1. When the telephone base is in idle mode, press
MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to CID time sync, then
press MENU/SELECT.
4. Press qCID or pDIR to highlight On or Off, then press
MENU/SELECT to save. There is a confirmation tone and
the screen returns to the previous menu.
Key tone
>CID time sync
p
q
CID TIME SYNC
>On
p
q
Rename base
>Key tone
p
q
KEY TONE
q
To Next Page
Loading...
