Multiple handset use
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
Using a handset or the telephone base:
When your device shows Press and hold [PTT] to talk, press
INTCOM. The screen shows Switch to Intercom?
Press SELECT. Your device displays Calling BASE 0 or
Calling HANDSET X. The destination device briefly shows Push to
talk Ended and then HANDSET X is calling or BASE 0 is calling. The
destination device rings.
Press HOME/FLASH or any dialing keys (0-9, or TONE ) on the
destination handset, or press HOME or any dialing keys (0-9, or TONE
) on the telephone base to answer the intercom call. Both devices now
show Intercom.
To end the intercom call, press OFF/CANCEL on your handset or place
the handset in the telephone base or charger, or press END on the
telephone base. Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
Using a handset or the telephone base:
During a one-to-one PTT, press HOME/FLASH, CELL 1 or CELL 2 on
the initiating or destination handset, or press HOME, CELL 1 or
CELL 2 on the telephone base. The PTT call ends automatically and the
outside call is answered.
During a one-to-group PTT call, press HOME/FLASH, CELL 1 or
CELL 2 on the initiating handset, or press HOME, CELL 1 or
CELL 2 on the telephone base. The PTT call ends automatically and the
outside call is answered.
During a one-to-group PTT call, press HOME/FLASH, CELL 1 or
CELL 2 on any one of the destination handsets or telephone base. That
device answers the outside call. The PTT call continues for the rest of the
PTT participants.
To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base. The
telephone continues to ring.
1.
2.
3.
4.
•
•
•
•
79
To Next Page
Loading...
Need help?
General
