Answering system
Message playback
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
pause or delete the message.
When messages are playing on the telephone base:
Press q/VOLUME/p to adjust the message playback volume.
Press /S�IP or S�IP to skip to the next message.
Press /REPEAT or REPEAT to repeat the message.
Press /REPEAT or REPEAT twice to hear the previous message.
Press X/DELETE to delete the message.
Press 2 to pause the playback and show the caller ID information.
Press HOME or CALL to use the home line, or press CELL 1 or
CELL 2 to use the cell line to call back the caller. If necessary, press #
(pound key) or 1 to show different dialing options.
Press CANCEL or BAC� to restart the playback. If you do not call back
within 10 seconds, message playback restarts.
Press HOME or CELL 1 or CELL 2 to pause the message
playback. The telephone base screen displays Call back? with the caller
ID information. Press CALL to call back the caller, or BAC� to restart the
message playback. If the dialing format used is not correct, then use the
option above to choose the correct dialing format before calling back the
caller.
Press /PLAY/STOP or CANCEL to stop the playback.
•
•
•
•
•
•
–
–
•
•
117
To Next Page
Loading...
Need help?
General
Weight and Dimensions
