EasyManua.ls Logo

AT&T DC - Safety Warning Label

AT&T DC
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Neutralize any spilled battery emission with the special solution contained in an approved
spill kit or with a solution of one pound Bicarbonate of soda to one gallon of water. Report
chemical spills and seek medical attention if necessary.
Never use un-insulated tools or other conductive materials when installing, maintaining,
servicing or replacing batteries.
A battery showing signs of cracking, leaking, or swelling should be replaced immediately
with a battery of identical type and rating.
2.3 Safety Warning Label
The AC power cord is supplied with the warning label “DO NOT UNPLUG! – Power Supply for
Voice, 911 Dialing, and Battery Charging” attached to the cord.
Figure 2: Warning Label
! DO NOT UNPLUG!
Power Supply
for Voice, 911 Dialing, and Battery Charging.
DC UPS Operation Manual, Rev 1.0 Page: 5 of 8