AT&T DLP72362 - Initial basic settings; Voice guide setup

13
Initial basic settings
Aer you install your telephone or power returns following a power outage, the
handset will prompt you to set the date and time. To skip setting the date and time,
press OFF/CANCEL on the handset.
Voice guide to set Smart call blocker and
answering system
Aer you install your telephone for the rst time, the telephone base will prompt if
you want to set Smart call blocker and answering system. Follow the voice guide to
set or skip the settings.
Voice guide to set Smart call blocker
The telephone base announces, “Hello! This voice guide will assist you with the basic
setup of Smart call blocker...”.
With the voice guide, you can set your Smart call blocker:
Ì To screen calls with telephone numbers that are not saved in your phonebook or
star name list.
- OR -
Ì Do not screen calls, and allow all incoming calls to get through.
Listen to the instructions to set up your Smart call blocker.
Voice guide to set answering system
Aer the Smart call blocker setting is done or skipped, the telephone base will
then prompt if you want to set the number of rings and message alert tone of the
answering system. Listen to the instructions to set up your answering system.
Stop the voice guide
f While the voice guide is playing, press X/DELETE on the telephone base.
Restart the voice guide
f On the telephone base, press the keys in the following sequence.
/SKIP -> /SKIP -> /SKIP -> /REPEAT -> /REPEAT -> /SKIP ->
/PLAY/STOP.
We recommend you program your telephone system before use. The following are
a few examples of common features to set before using the telephone. Refer to the
Handset settings and Answering system settings in the Complete user’s manual for
detailed instructions on setting all telephone features.