AT&T DLP72362 - CID Caller ID; Call ID announce setting; Call log operations; Smart call blocker setup

21
Smart call blocker *
§
If you have subscribed to caller ID service, then you can use the Smart call blocker
feature to screen incoming calls.
For detailed instructions on how to set up and operate your Smart call blocker, read
the Smart call blocker leaet included in your package or read the online Complete
user’s manual.
* Use of Smart call blocker feature requires subscription of caller ID service.
§ Includes licenced Qaltel
TM
technology.
Qaltel
TM
is a trademark of Truecall Group Limited.
Caller ID
This product supports caller ID services oered by most telephone service
providers. The telephone stores caller ID information of the last 50 incoming calls in
the telephone base. This information is common to all devices.
Call lD announce
1. MENU -> / -> Caller ID annc -> SELECT.
2. / -> On or O -> SELECT.
Notes:
f To use the caller ID announce feature, you must subscribe to caller ID service from your telephone
service provider.
f Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
Review and dial a number in the call log
1. Press CID on the handset in idle mode -> / to scroll through the list.
2. Press HOME/FLASH or /SPEAKER on the handset to dial with the home
line.
-OR-
Press CELL on the handset to dial with the cell line.
Erase missed calls indicator in the call log
When the screen shows XX missed calls, scroll the call log one by one, or press and
hold OFF/CANCEL on the handset in idle mode.