16
Add a Bluetooth
®
cell phone/headset
Note: Your DLP72212/DLP72362/DLP72412 is compatible with Bluetooth version 2.0 or above
devices.
To use a Bluetooth enabled cellular phone or headset with your telephone, you
must rst pair and connect your Bluetooth cellular phone or headset with the
telephone base.
Bluetooth wireless technology operates within a short range (up to 30 feet). Keep
the connected device within 15 feet of the telephone base for optimal performance.
Method 1
To pair and connect a cell phone using the telephone base:
Cell phone:
1. Press and hold CELL 1 or CELL 2 for about four seconds until the CELL 1 or
CELL 2 light flashes.
2. Place the cell phone next to the telephone base. Turn on the Bluetooth feature
of your cell phone and search for or add new devices. Once your cell phone nds
your AT&T phone (AT&T DECT 6.0), press the appropriate key on your cell phone
to continue the pairing process.
3.
Method 2
To pair and connect a cell phone or headset using the voice guide:
Ì Press on the telephone base and then follow the voice guide to pair and
connect a cell phone or headset.
Download a cell phone phonebook
To download a cell phone phonebook using the voice guide:
Before downloading a phonebook, make sure the cell phone is paired, active, and
connected to your DLP72212/DLP72362/DLP72412.
1. Press on the telephone base and then follow the voice guide to pair and
connect a cell phone if you have not done so.
2. Then, follow the voice guide to download your cell phone phonebook.
Scan the QR code on the right to watch the tutorial video and learn how to
pair and connect your cell phone or headset, or to download your cellphone
phonebook using the voice guide.
Bluetooth®
Bluetooth
setup video
To Next Page
Loading...
