AT&T DLP73390 - Date and Time

13
Initial basic settings
Aer you install your telephone or power returns following a power outage,
the handset and telephone base will prompt you to set the date and time. To
skip setting the date and time, press OFF/CANCEL on the handset or press
on the telephone base.
Voice guide to set Smart call blocker and
answering system
Aer the date and time setting is done or skipped, the telephone base will prompt if
you want to set Smart call blocker. Press Yes to start the Smart call blocker setup
via voice guide. To skip the setup, press twice on the telephone base.
Aer the Smart call blocker setting is done or skipped, the telephone base will
then prompt if you want to set up the answering system. Press Yes to start the
answering system setup via voice guide. To skip the setup, press on the
telephone base.
We recommend you program your telephone system before use. The following
are a few examples of common features to set before using the telephone. Refer to
the Handset and telephone base settings and Answering system settings in the
Complete user’s manual for detailed instructions on setting all telephone features.
Date and time
Note: Set the date/time before using the answering system.
Using a cordless handset:
1. MENU/SELECT -> / -> Set date/time -> MENU/SELECT.
2. Enter the month (MM), day (DD) and year (YY) -> MENU/SELECT.
3. Enter the hour (HH) and minute (MM).
4. / -> AM or PM -> MENU/SELECT.
Using the telephone base:
1. Menu -> / -> Set date/time -> Next .
2. Enter the month (MM), day (DD) and year (YY) ->
Next .
3. Enter the hour (HH) and minute (MM).
4. / -> AM or PM -> Save .
MONTH DATE YEAR
-- / -- / --
SET DATE
Next
Back