AT&T DLP73390 - Set Number of Rings

45
Set number of rings
You can set the answering system to answer an incoming call aer 2, 3, 4, 5, or 6
rings. You can also select toll saver. If you choose toll saver, the answering system
answers a call aer two rings when you have new messages, or aer four rings
when there are no new messages. This enables you to check for new messages and
avoid paying unnecessary long distance charges if you are calling from out of your
local area.
Using a cordless handset:
1. MENU/SELECT -> / -> Answering sys -> MENU/SELECT.
2. / -> Ans sys setup -> MENU/SELECT.
3. / -> # of rings -> MENU/SELECT.
4. / to choose among 2, 3, 4, 5, 6, or Toll saver -> MENU/SELECT.
Using the telephone base:
1. Press Menu sokey-> Answering system .
2. / to scroll to the next page-> Number of rings .
3. Press your desired number of rings.
MENU 1/2
Answering
system
Smart call
blocker
Directory Block list
Caller ID log Intercom
Next
ANSWERING SYSTEM 2/2
Call screening
Remote code
Recording time
Number of rings
Message alert
tone
Previous
NUMBER OF RINGS
5 Rings
6 Rings
Toll Saver
2 Rings
3 Rings
4 Rings
Answering system