AT&T DLP73390 - LCD Language

14
Smart call blocker setup via voice guide
You can follow the voice guide to set up Smart call blocker.
Using the telephone base:
1. Press Menu sokey -> Smart call blocker .
2. / -> Voice guide -> Next .
3. Press 1 if you want to screen home calls with telephone numbers that are not
saved in your Directory or Star name list; or Press 2 if you do not want to screen
calls, and want to allow all incoming calls to get through.
Basic answering system setup via voice guide
You can follow the voice guide to record your own announcement, set the number
of rings and set the message alert tone.
Using the telephone base:
1. Press Menu sokey -> Answering system .
2. / -> Voice guide -> Next .
3. Set up the answering system by inputting the designated numbers, as
instructed.
LCD language
Using a cordless handset:
1. MENU/SELECT -> / -> Settings -> MENU/SELECT.
2. MENU/SELECT again to select LCD language.
3. / to choose English, Français or Español -> MENU/SELECT.
Using the telephone base:
1. Press Menu sokey -> Settings .
2. / -> LCD language .
3. Press to select English or Français .
Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to
English without going through the French or Spanish menus.
f Press MENU/SELECT on the handset in idle mode -> enter 364#; or
f Press MENU on the base in idle mode -> enter 364#.
Initial basic settings