EasyManua.ls Logo

AT&T DLP73390 - Battery Installation and Charging

AT&T DLP73390
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
f Make sure you have turned on or logged in to the applications on your cell
phone that you will be sending your voice commands, such as GPS, e-mail and
social networking accounts.
f Your cell phone’s data or Wi-Fi signal is in full strength and your cell phone can
connect to the Internet.
f Try to activate the voice app on your cell phone to ensure it is in place.
To activate remote voice control:
1. Press VOICE on the handset or MUTE/VOICE on the telephone base.
-OR-
If you have two connected cell phones -> / to select a device.
2. When the telephone base or handset plays the conrmation tone, speak toward
the telephone base or handset, and then wait for feedback. Make reply to the
voice app’s feedback, if necessary.
3. Press OFF/CANCEL on the handset or on the telephone base to
exit.
Cell phone X 00:05
ECO
1
<Cell device name>
REMOTE VOICE CONTROL
Stop
Refer to the online Complete users manual for a list of troubleshooting tips on
using Remote voice control feature.
Bluetooth
®
Android® and Google Play® are registered trademarks of Google Inc.
Connect to Cell
TM
is a trademark of Advanced American Telephones.
Siri® is a registered trademark of Apple Inc.
Google Now
TM
is a trademark of Google Inc.
S Voice® is a registered mark of Samsung Electronics Co., Ltd.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Other manuals for AT&T DLP73390

Related product manuals