43
Answering system operation
Message counter displays
The message counter usually displays the total
number of memos and incoming messages. See the
list below for explanations of other displays in this
counter.
Message counter displays
0 No messages.
1-95 Number of messages/memos, or mes-
sage number currently playing (flashes
when there are new messages).
10-99 Current remote access code while setting
(page 40).
1-99 (counting) Elapsed time while recording a memo
(page 42) or announcement up to 90
seconds (page 39).
1-95 (flashing) Total number of messages and memos
including un-reviewed messages.
99 (flashing) Memo recording exceeded maximum time
of 99 seconds.
F (flashing) Memory is full. Messages must be deleted
before new messages can be received.
-- System is answering a call, being accessed
remotely, or the clock is being programmed.
-- (flashing) System is being programmed or initialized.
On (or) OF Displayed for two seconds when any answer-
ing system setting is turned on or off.
02, 04, 06, tS Current number of rings while setting (page
40).
Message counter
16
To Next Page
Loading...
