Registration
Handset 1 Handset 2 Handset 3
Handset 4
• Press and hold HANDSET LOCATOR on
the main telephone base until the IN
USE light comes on (about 4 seconds),
then release the button.
• The handset will show PLEASE
WAIT... for a while.
• The handset will show HS X
REGISTERED and beep once if reg-
istration was successful.
NOTE: If the registration is not successful the dis-
play will show NOT REGISTERED. Reset the hand-
set by lifting the handset out of the cradle and then place
the handset back in the cradle. Now try the registration pro-
cess again.
NOTE: You can register only one handset to the
base at a time.
NOTE: If you are on a call, using the Call Log or
Directory, or another phone on the same line, you
cannot register a handset.
6
To Next Page
Loading...
Need help?
General
