Registration
Before using a new E597-1 handset, you must register it with the E5917/
E5926/E5927B/E5937B/E5938B/E5939B/E5947B base.
The handset provided with your E5926/E5917 is automatically registered
as Handset 1. Additional handsets will be assigned numbers in the order
they are registered (Handset 2, Handset 3, or Handset 4). You can register
a maximum of 4 handsets.
The E5927B/E5938B has 2 handsets automatically registered as Handset
1 and 2. You can register two additional handsets, which will be assigned
number 3 and 4.
The E5937B/E5939B has 3 handsets automatically registered as Handset
1, 2 and 3. You can register one additional handset, which will be assigned
number 4.
The E5947B has 4 handsets automatically registered as Handset 1, 2, 3
and 4. It is a full system. If you are replacing a handset or wish to change
the assigned handset number of your registered handsets, you must first
de-register all the handsets, then re-register all handsets (see page 7).
Before using a new E597-1 handset, you must
register it with the base.
To add a new handset:
• When first purchased, all optional acces-
sory handsets show NOT REGISTERED
on the screen.
• Make sure your handset battery is prop-
erly installed and charged.
• Put the handset in a cradle which is
plugged into AC power. After a few sec-
onds PRESS HNDST LOC 4 SEC ON
BASE will be shown on the screen.
5
HS X REGISTERED
NOT REGISTERED
PRESS HNDST LOC
4 SEC ON BASE
To Next Page
Loading...
