AT&T E597-1 User Manual

8
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry standard
2.5 mm headset (purchased separately). For best results use an AT&T 2.5
mm headset.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap).

AT&T E597-1 Specifications

General

Brand	AT&T
Model	E597-1
Category	Handsets
Language	English