AT&T EL51103 - Temporary Tone Dialing; Chain Dialing

24
Telephone operation
Options while on calls
Temporary tone dialing
If you have dial-pulse (rotary) dialing service only, you can
temporarily switch from pulse-tone dialing to touch-tone
dialing during a call.
During a call, press TONE .
Use the dialing keys to enter the desired number. The
telephone sends touch-tone signals.
The telephone automatically returns to pulse dial mode after you end the call.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in
the directory, caller ID log or redial list. Doing this can be useful if you need
to access numbers other than telephone numbers (such as account numbers
or access codes).
To access the directory while on a call:
Press MENU/SELECT.
Press MENU/SELECT to choose Directory.
Press CID or DIR to scroll or use the dialing keys
(0-9) to find the desired entry (see Search by name on
page 34).
Press MENU/SELECT. The telephone automatically dials
the displayed number.
To access the caller ID log while on a call:
Press MENU/SELECT.
Press CID or DIR to scroll to Caller ID log, then press
MENU/SELECT.
Press CID or DIR to scroll to the desired entry. Press #
(pound key) to view other dialing options, if necessary.
See View the dialing options on page 43 for
more details.
Press MENU/SELECT. The telephone automatically dials
the displayed number.
1.
2.
3.
1.
2.
3.
4.
1.
2.
3.
4.
10:30
PM
11/20
PHONE 0:01:30
888-722-7702
ROBERT BROWN
800-360-4121
ECO
Directory
ECO
Charlie Johnson
888-883-2445
ECO
ECO
10:30
PM
11/20