AT&T EL51103 - Save a Caller ID Log Entry to the Directory

45
Caller ID
Caller ID operation
Save a caller ID log entry to the directory
While reviewing the caller ID log, press CID or DIR to browse through
the caller ID log.
Press MENU/SELECT. The screen shows Edit number.
Use the dialing keys to modify the telephone number (up to 30 digits).
Press CID or DIR to move the cursor to the left or right.
Press and hold REDIAL/PAUSE to enter a 3-second dialing pause
(a P appears).
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press MENU/SELECT to save the number in the display. The screen shows
Edit name.
Use the dialing keys and refer to Character chart on page 31 to modify
the name (up to 15 characters).
Press 0 to add a space.
Press CID or DIR to move the cursor to the left or right.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press MENU/SELECT to save. The screen shows Saved with a confirmation tone.
notes:
The screen shows Number repeated if the number is already in the directory. You cannot
save the same number more than once.
If the directory is full, the screen shows Directory full.
If you try to save a caller ID log entry to the directory without a number,
Unable to save displays.
If the telephone number has more than 15 digits, only the last 15 digits appear in the
caller ID log. However, the telephone can still save all digits (up to 24 digits) of that
telephone number from the caller ID log in the directory.
You might need to change how a caller ID number is saved in the directory if the entry does
not appear in the correct format. Caller ID numbers might appear with an area code that
is not necessary for local calls, or without a 1 that is necessary for long distance calls. For
details, see View dialing options on page 43.
1.
2.
3.
•
•
•
•
4.
5.
•
•
•
•
6.
•
•
•
•
•