AT&T EL51250 - Telephone settings

9
Telephone settings
Use Menu structure on page 8 to find and set features. Many are simple yes/no
questions. The following are a few examples of common features to set. Refer to
Handset settings in the on-line user’s manual for detailed instructions on setting all
telephone features.
Ringer volume
You can set the handset ringer volume level, or turn the ringer off. When the ringer is
off, appears on the handset screen.
On a handset, use MENU/SELECT in idle mode. Select >RINGERS
and then select >RINGER VOLUME.
Press DIR or CID to sample each volume level.
Press MENU/SELECT to save your preference.
NOTE: If the handset ringer volume is set to off, that handset ringer is silenced for all
incoming calls; however, that handset still plays the paging tone when initiating the handset
locator feature.
Date and time
If you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. To set the date and time manually:
On a handset, use MENU/SELECT in idle mode. Select >SETTINGS and then select
>SET DATE/TIME.
Use the dial pad keys (0-9) to enter two-digit numbers for the month, day and year.
Press MENU/SELECT.
Use the dial pad keys (0-9) to enter two-digit numbers for the hour and minute.
Press DIR or CID to choose AM or PM. Press MENU/SELECT to confirm.
1.
2.
3.
1.
2.
3.
4.
RINGER VOLUME