AT&T EL51250 - Dialing directory numbers; Speed dial setup and use

15
To dial a directory number
When you see the desired directory number, press PHONE/FLASH or SPEAKER.
To edit a directory entry
When the desired directory number is on the screen, press MENU/SELECT.
Edit the telephone number (page 14). Press MENU/SELECT.
Edit the name (page 14).
Press MENU/SELECT to confirm.
To delete a directory entry
When the desired directory number is on the screen, press MUTE/DELETE and then
MENU/SELECT.
Speed dial
There are 10 speed dial locations that you assign from the directory (see Speed dial
locations in the on-line user’s manual for details). The speed dial locations are shared
by all handsets. Changes made apply to all handsets.
To enter a speed dial number
On a handset, use MENU/SELECT in idle mode. Select >DIRECTORY and then select
>SPEED DIAL.
Press DIR or CID to scroll to the desired speed dial location.
Press MENU/SELECT to show the directory. Press DIR or CID to browse through
the directory or press the dial pad keys (0-9) to start a name search.
When the screen shows the desired directory entry, press MENU/SELECT.
To dial a speed dial number
When in idle mode, press and hold a dial pad key (0 though 9) to display the desired
speed dial entry.
Press PHONE/FLASH or SPEAKER to dial the displayed telephone number.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.