AT&T EL52103 - Message Window Displays

65
Answering system
Message window displays
The message window on the telephone base displays the total number of
messages. See the following table for other message window displays.
0 There are no messages in the answering system.
0
(ashing)
Aer a power failure, the number in the message window ashes
to indicate that the date and time need to be set.
1-99 Total number of messages and memos.
Current message number during old message playback.
•
•
1-99
(ashing)
Total number of new messages and memos. The number ashes
when there are new messages that have not been reviewed.
Current message number during new message playback.
Aer a power failure, the number in the message window
ashes to indicate that the date and time need to be set.
•
•
•
1-99 and F
(alternating)
Memory is full. Messages must be deleted before new messages
can be recorded.
-- The answering system is being programmed by a system
handset.
The answering system is answering a call or recording a memo
or announcement.
The answering system is being accessed remotely.
The directory or caller ID log is being accessed by a system
handset.
•
•
•
•
0-6 Telephone base ringer volume while adjusting.
1-8 Speaker volume level of the telephone base while adjusting.