58
Answering system
Answering system settings
Remote access code
To access your answering system remotely from any touch-tone telephone,
you need to enter a 2-digit number (00-99). Unless you change it, the remote
access code is 19.
To change the remote access code:
Press in idle mode to enter the
main menu.
Press or to scroll to Answering sys, then
press .
Press or to scroll to Ans sys setup, then
press .
Press or to scroll to Remote code, then press
.
Press or to select the remote access code, or
use the dialing keys to enter the correct number (00-99).
Press to save your setting.
NOTE: For more details about the remote access feature, refer to Remote access on
pages 69-70.
1.
2.
3.
4.
5.
6.
Remote code
ECO
Remote code
19
ECO
To Next Page
Loading...
