AT&T EL52319 - Wall-Mount to Tabletop Installation

13
Getting started
Wall-mount to tabletop installation
To change the telephone base from wall-mount installation to tabletop
installation, follow the steps mentioned below.
1. If the telephone line cord and power adapter cord are bundled, untie
them rst.
2. Push the telephone base up to detach it from the wall-mount bracket.
Unplug the telephone line cord (or DSL lter) from the wall. Unplug the
power adapter from the power outlet.
3. Push the wall-mount bracket up to remove it from the wall.
4. Refer to Telephone base and charger installation on page 7 to install
the telephone base.
Wall-mount installation