28
Telephone operation
To access the redial list while on a call:
1. Press REDIAL/PAUSE. The screen shows the number
most recently called. To view up to 10 recently
called numbers, press
DIR,
CID or REDIAL/PAUSE
repeatedly to scroll to the desired number.
2. Press MENU/SELECT. The telephone dials the displayed number.
NOTES:
X While on a call, you cannot edit a directory entry or redial entry, or copy a caller ID entry into
the directory.
X If the directory, caller ID log or answering system is being used and you attempt to access one
of them, the screen shows Not available.
X Press
OFF/CANCEL to exit directory, caller ID log or redial list and return to the call without
dialing the displayed number.
Join a call in progress
If a handset is already on a call and you would like to join the call:
Press
PHONE/FLASH or /SPEAKER on another system handset.
To end the call:
Press
OFF/CANCEL or place the handset in the telephone base or charger.
The call does not end until all handsets hang up.
NOTES:
X If you have registered a cordless headset or cordless speakerphone to the telephone base,
you can also join a call in progress using the registered device. Refer to the user’s manuals of
your cordless headset or speakerphone for more information.
X You can use a maximum of four devices at the same time on an outside call. If you have
ve handsets and the h handset attempts to join the call, the handset screen shows
Unable to call.
Options while on calls
Redial 6/10
888-722-7702
ECO
To Next Page
Loading...
