Wireless Genie Mini with Genie 2
R
Activation & Equipment
Return Instructions
We’re committed to bringing you the best in video entertainment every day. Your
replacement Wireless Genie Mini is enclosed. Here’s how to connect and activate it, plus
how to return your non-working equipment.
To avoid non-return fees, follow important return instructions at the end of this document.
1 2 3 4 5 6
Connect Reset Setup Activate Program Return
Instructions can be found online at
att.com/equipmentinstall or by
scanning the QR code.
1 Connect your replacement Wireless Genie Mini
· Carefully stack your replacement Wireless Genie Mini on top of your non-working
Wireless Genie Mini.
· Transfer one connection at a time from the non-working receiver to the replacement
receiver, except for the power cord. Need help? Go to att.com/equipmentinstall
· Plug
the
power
cord
into
the
replacement
Genie
Mini,
then
into
a
power
outlet.
If
the
receiver doesn’t automatically power up, press the POWER button.
· Turn
on
your
TV.
The
CONNECTING
TO
VIDEO
BRIDGE
screen
will
appear.
2 Reset your remote
· On the remote, press and hold MUTE and SELECT.
· The GREEN LED will blink twice.
· Press 9-8-7 on your remote.
· The GREEN LED will blink four times if successful.
3 Setup
Go to the Genie 2 server.
· Press and release the ADD CLIENT button on top of your server. The button will start
ashing GREEN.
Note: The ADD CLIENT button will time out in 20 mins. If you need more time, press it again.
Go back to your replacement Wireless Genie Mini connected to a TV:
· You
should
see
the
CONNECT
TO
VIDEO
BRIDGE
screen.
· If
the
signal
quality
is
good
or
excellent,
select
CONNECT
NOW;
otherwise,
try
moving
the
client
closer
to
the
Genie
2
server
or
call
Customer
Care
at
800.531.5000.
· Select REPLACE A LOCATION, then choose the Client you want to remove, and select
REPLACE. Confirm your choice by selecting YES, REPLACE.
· Note: The new Genie Mini may display a flashing red LED and the screen may flash gray
intermittently during this setup step.
· The guided setup is complete. Select WATCH TV.
2
4
3
1
(Continued on back)
To Next Page
Need help?
General