By default, the telephone is set to use line 1 for making calls. When you answer a call, the telephone automatically
selects the ringing line.
Making, answering or ending a call
1. Press SPEAKER to use the primary line. -OR- To override automatic line selection, press SPEAKER , then
press LINE 1 or LINE 2. -OR- If you choose speakerphone in Choose the preferred mode (see user’s manual),
press LINE 1 or LINE 2 directly to activate the speakerphone.
2. Wait for a dial tone, then dial the telephone number. The screen displays the elapsed time as you talk (in hours,
minutes and seconds).
3. Press SPEAKER to hang up.
To make a call with the handset:
1. Lift the handset to use the primary line. -OR- Lift the handset, then press LINE 1 or LINE 2 to override automatic
line selection.
2. Wait for a dial tone, then dial the number.
3. Place the handset on the telephone base to hang up.
To make a call with the corded headset:
1. Make sure the corded headset is connected to the telephone base. Press HEADSET on the telephone base to
use the primary line. -OR- Press HEADSET, then press LINE 1 or LINE 2 to override automatic line selection. -
OR- If you chose Headset in Choose the preferred mode (see user’s manual), press LINE 1 or LINE 2 directly to
activate the headset.
2. Wait for a dial tone, then dial the number.
3. Press HEADSET to hang up.
To answer a call:
Lift the handset, or press SPEAKER or HEADSET. -OR- Press the LINE button of the ringing line to answer the call
with the preferred mode.
On hook dialing (predialing)
1. Use the dialing keys to enter a telephone number. Press REMOVE to make corrections when entering the
telephone number. Lift the handset, or press SPEAKER or HEADSET. -OR-
2. Press LINE 1 or LINE 2 to override automatic line selection and dial the number using your preferred mode.
ClearspeakTM dial-in-base speakerphone
During a call using the handset, press SPEAKER , then hang up the handset. This allows you to use the telephone
hands free and lets more people participate in the conversation.