8
Version 1.0 11/2018
User Manual—Streaming Device and Remote Control
C. Other Associated Hardware
1. Mounting Cables
The streaming device (C71KW) can be set on a tabletop or mounted
to a wall by attaching a cable tie to the recess in the bottom cover.
2. Power Supply
The streaming device (C71KW) uses the DIRECTV® EPS10 power supply.
See the DECA II Technical Communications document D-00026 for
detailed information.
3. Remote Control
The streaming device (C71KW) works with the RC81V Remote Control.
(The box and remote control are not compatible with any older
DIRECTV or AT&T U-verse® equipment.) Like other DIRECTV remote
controls, the RC81V can be programmed to operate some features on
TVs or audio/video equipment. The key features of the RC81V Remote
Control are:
FIGURE 4: STREAMING DEVICE—
WALL MOUNTING
• The RC81V Remote Control works in IR, RF and BLE (Bluetooth Low Energy Mode).
• Basic remote operations can be performed in the IR mode.
• The remote uses Bluetooth for two-way communication to the streaming device.
• Like RF mode, Bluetooth eliminates the need for the remote and the paired devices to be in line of
sight to each other.
• The RC81V Remote Control has a touchpad. Basic operations and functions can be made by sliding and
pressing the touchpad.
• If the remote is not paired to a streaming device, the touchpad can be used for functions like Up, Down,
Le, Right and Select.
• Once the remote is paired to a streaming device, the touchpad will function as a track pad so you can
navigate horizontally (le to right) and vertically (up and down) in the screens. You can perform both
Slow Swipe (precise movement) and Fast Swipe (quick scan across multiple pages).
• Once paired, Voice recognition is also available with the RC81V Remote Control so you can use voice search.
To Next Page
Loading...