8
Getting started
Switch hook presser
When the CORDED HANDSET CONNECTED
switch is set to YES, pressing on the
headset raises or lowers the switch
hook presser.
Lifter control cable
Plug this cable into the LIFTER jack on
the headset base.
RING DETECT jack
Plug in the auxiliary ring
detector (page 26).
ADJUST LIFTER knob
Adjusts the height of the lifter arm (page 23).
Lifter arm
Holds the corded telephone handset.
Quick reference guide - handset lifter
SENSOR ADJ knob
Adjusts the sensitivity of the ring detector (page 27).
To Next Page
Loading...
