32
Getting started
Headset attachments
Over the head band
To attach the head band to the headset:
Make sure there are no headset attachment, except the earbud,
connected to the headset.
Insert the earpiece into the loop of the ear pad as shown in
Figure 6.
Push the earpiece into the ear pad until it clicks into place as
shown in Figure 7.
Adjust the head band to fit your head. Adjust and rotate the
angle of the headset until the microphone is pointing towards
your mouth as shown in Figure 8.
1.
2.
3.
4.
NOTES:
To wear on the other ear, rotate the headset within the loop of the ear pad.
Firmly grip the ear pad with one hand whenever adjusting the headset
microphone up or down.
•
•
Figure 8
Figure 6
Figure 7
To Next Page
Loading...
