AT&T TL7812 - Option 2: Connect the Headset to a Corded Phone and Computer

17
Getting started
Headset base and handset lifter installation
Option 2: Connect the headset to a corded phone and computer
Plug one end of the corded phone connection cable into the
CORDED PHONE CONNECTION jack (blue dot) at the back of
the headset base.
Plug the other end of the corded phone connection cable into
the handset jack on the corded phone.
Unplug the curly handset cord from the handset jack on the
corded phone and plug it into the jack on the corded phone
connection cable.
1.
2.
3.
Corded phone
A DSL filter (not included) is
required if you have DSL
high-speed Internet service.
The DSL filter must be plugged
into a telephone wall jack.
1
2
3
4
5
6
7
8
9
Telephone
wall jack
Telephone
line cord