35
Getting started
To wear the headset on your left ear:
Remove the ear pad and supporting pad from the neck band
by carefully pulling them up through the stems at the end of
the neck band as shown in Figure 12.
Snap the socket of the ear pad into the stem at the left end of the
neck band. Snap the socket of the supporting pad into the stem at
right end of the neck band as shown in Figure 13.
Follow Steps 1-5 in To attach the headset to the neck band on
page 34.
1.
2.
3.
Headset attachments
Figure 12
Figure 13
Ear pad
Supporting pad
To Next Page
Loading...
