7
Install
Belt clip & optional cordless handset
To attach the belt clip:
Snap the belt clip into the
slots on both sides of the
cordless handset.
To remove the belt clip:
Gently li either of the
belt clip tabs outwards to
remove the belt clip from
the handset.
For handsfree telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To
purchase a headset, visit our website at https://telephones.att.com
or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Li the plastic
cover here.
Plug a 2.5 mm headset
(not included) into the jack
on the side of handset
(beneath the small plastic
cover).
To Next Page
Loading...
