114
Smart call blocker
Call block settings
4. When the screen displays ENTER NUMBER, use the dialing keys to enter a
number (up to 30 digits).
f Press CID or DIRtomovethecursortotheleorright.
f Press BACKSP, or press MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase a digit.
f Press and hold MUTE/DELETE on the handset or X/DELETE on the telephone
base to erase all digits.
f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p
appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
CID or DIR or REDIAL/PAUSErepeatedlytondthedesirednumber.Press
INSERT to copy the number.
5. Press NEXT to move on to the name.
f The screen shows Number already saved if the number is already in the
block list. You cannot save the same number twice.
6. When the screen displays ENTER NAME, use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
appears.Therstcharacterofeverywordiscapitalized.
f Press CID or DIRtomovethecursortotheleorright.
f Press 0 to add a space.
f Press BACKSP, or press MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase a character.
f Press and hold MUTE/DELETE on the handset or X/DELETE on the telephone
base to erase all characters.
f Press TONE to change the next letter to upper or lower case.
7. Press SAVE to store your block entry.
Notes:
f Numbers saved in your directory can also be saved to the block list.
f If you save a block entry that has already been saved to the allow list, the entry in the allow list will be removed.
To Next Page
Loading...
Need help?
General
