AT&T TL90077 User Manual

139
Smart call blocker
Screen uncategorized home calls
Block call
1. When the telephone starts ringing, and the screen displays Screened call:
f On the handset, press HOME/FLASH or /SPEAKER to
pick up the call.
-OR-
f On the telephone base, press HOME to pick up the call.
If you have turned on the caller ID announce feature, the
telephone announces “Call from...”andthecaller’sname.Aer
you pick up the call, the telephone announces “To answer the
call, press 1. To answer and always allow this number, press 2.
To block this number, press 3. To send this call to the answering
system, press 4. To repeat these options, press *”.
2. Press 3 or CALL BLOCK to block the call. The telephone plays the block
announcement “The number you are calling is not accepting your call. Please
hang up.” to the caller. The telephone number will be added to your block list.
Notes:
f To turn on or off caller ID announce, see page 42.
f When the telephone is ringing, you can press MUTE to mute the ringer temporarily.
Send call to answering system
1. When the telephone starts ringing, and the screen displays Screened call:
f On the handset, press HOME/FLASH or /SPEAKER to pick up the call.
-OR-
f On the telephone base, press HOME to pick up the call.
If you have turned on the caller ID announce feature, the telephone announces
“Call from...”andthecaller’sname.Aeryoupickupthecall,thetelephone
announces “To answer the call, press 1. To answer and always allow this number,
press 2. To block this number, press 3. To send this call to the answering system,
press 4. To repeat these options, press *”.
2. Press 4 to forward the call to the answering system.
Note: The call is forwarded to the answering system and the caller can leave a message even if the answering
system is off.
Home
Screened
c a ll
888-883-2445
MUTE
Added to
bloc k list

AT&T TL90077 Specifications

General

Brand	AT&T
Model	TL90077
Category	Cordless Telephone
Language	English