135
Smart call blocker
Screen home calls without numbers
Send call to answering system
1. When the telephone starts ringing, and the screen displays Screened call:
f On the handset, press HOME/FLASH or /SPEAKER to pick up the call.
-OR-
f On the telephone base, press HOME to pick up the call.
If you have turned on the caller ID announce feature, the telephone
announces “Call from...”andthecaller’sname.Aeryoupickupthecall,the
telephone announces “To answer the call, press 1. To send this call to the
answering system, press 4. To repeat these options, press *”.
2. Press 4 to send the caller to the answering system.
Notes:
f To turn on or off caller ID announce, see page 42.
f When the telephone is ringing, you can press MUTE to mute the ringer temporarily.
f The caller is sent to the answering system and can leave a message even if the answering system is off.
End call
1. When the telephone starts ringing, and the screen displays Screened call:
f On the handset, press HOME/FLASH or /SPEAKER to pick up the call.
-OR-
f On the telephone base, press HOME to pick up the call.
If you have turned on the caller ID announce feature, the telephone
announces “Call from...”andthecaller’sname.Aeryoupickupthecall,the
telephone announces “To answer the call, press 1. To send this call to the
answering system, press 4. To repeat these options, press *”.
2. If you do not want to take the call, press OFF/CANCEL to end the call.