AT&T TL92220 - Bluetooth Setup

To Next Page

To Previous Page

Bluetooth setup

To use a Bluetooth enabled cellular phone with your telephone, you must

first pair and connect your Bluetooth cellular phone with the telephone base.

All TL92220/TL92270/TL92320/TL92370/TL92420/TL92470 handsets

can be used to make or answer calls on the cell phone line.

Bluetooth wireless technology operates within a short range (up to 30 feet).

When you pair a Bluetooth cell phone or Bluetooth headset to the telephone

base, keep the device within 15 feet of the telephone base for optimal

performance.

Pairing a cell phone

Before you begin, make sure that you have cellular coverage and your

Bluetooth enabled cell phone is not connected to any other Bluetooth

device. Refer to your cell phone user's manual to learn how to search for or

add new Bluetooth devices.

To pair and connect a cell phone:

Press MENU/SELECT in idle mode to enter the

main menu.

Press CID or DIR to highlight Bluetooth, then press

MENU/SELECT.

Press CID or DIR to highlight Add cellular, then

press MENU/SELECT. The screen displays

ADD CELLULAR Place cell phone next to base. Press

SELECT.

If there are already four devices on the paired

devices list, the screen displays Maximum of 4

devices can be paired and prompts you to replace

an existing paired device (page 13).

Press MENU/SELECT. The screen displays

Please set your cell phone to search for devices,

then press SELECT.

If a device is already connected to the telephone

base, the screen displays Connected device will

be temporarily disconnected. Press SELECT. Press

MENU/SELECT to temporarily disconnect the device

and continue the pairing process.

Turn on the Bluetooth feature of your cell phone and search for or add

new devices.

Press MENU/SELECT to set the telephone base to discoverable mode.

Once your cell phone finds AT&T DECT 6.0, press MENU/SELECT.

•

Answering sys

Related product manuals