AT&T TL96547 - Save a Redial Entry to the Directory

67
Telephone operation
Redial
Save a redial entry to the directory
Using a handset:
1. Press REDIAL/PAUSE in idle mode.
2. Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays.
3. Press SAVE.
4. The screen displays EDIT NUMBER. Use the dialing keys to edit the number, if
necessary.
f Press CID or DIR.
f Press BACKSP or MUTE/DELETE to erase a digit.
f Press and hold MUTE/DELETE to erase all digits.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a p appears).
5. Press NEXT.
6. The screen displays SELECT LABEL. Press CID or DIR to select one of the
following labels, and then press NEXT.
f Home
f Cell
f Work
f Other
7. The screen displays ENTER NAME. Use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
shows on the screen (see Character chart on page 89).
f Press CID or DIR.
f Press 0 to add a space.
f Press BACKSP or MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press a>A to change the next letter to upper or lower case.
8. Press SAVE and then Saved to directory
tone.