88
Directory
Create and review entries
Using the telephone base:
1. Press MENU in idle mode.
2. Press CID or DIR to highlight Directory, then press SELECT .
3. When Home is highlighted, press OPTION.
4. Press SELECT to choose Add contact.
5. The screen displays ENTER NUMBER. Use the dialing keys to enter a
telephone number (up to 30 digits).
f Press CID or DIR.
f Press BACKSP or X/DELETE to erase a digit.
f Press and hold X/DELETE to erase all digits.
f Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).
-OR-
When the screen displays ENTER NUMBER, press
REDIAL/PAUSE
to copy
a number from the redial list.
Press
CID or DIR
, or press REDIAL/PAUSE
repeatedly to locate the desired number. Press
INSERT
to copy the
displayed number.
6. Press NEXT .
7. The screen displays SELECT LABEL. Press CID or DIR to highlight one of
the following labels:
f Home
f Cell
f Work
f Other
8. Press NEXT to move on to the name.
9. The screen displays ENTER NAME. Use the dialing keys to enter a name (up
to 15 characters). Press a key repeatedly until the desired character shows
on the screen (see Character chart on page 89).
f Press CID or DIR.
f Press BACKSP or X/DELETE to erase a character.
f Press and hold X/DELETE to erase all characters.
f Press 0 to add a space.
f Press a>A to change the next letter to upper or lower case.
10. Press SAVE
and the screen shows Saved to directory. To change the entry later, see
pages 93-95.
To Next Page
Loading...
